| 图片 |
标 题 |
更新时间 |
 |
实木门包覆机
功能介绍
专业的实木单板贴覆设备,具有正负双压同时作用,配专用硅胶板，能同时完成门芯板双面木皮的贴覆。
General Introduction
This machine is just for filming the real wood. It can work with both positive pressure and negative pressure. With the special silicon sheet, it can paste the cabinet door with both sides at one time.
设备特性
1、液压系统关键部件采用进口配件，安全可靠技术优良。油缸分举升、加压二组，此结构减少油缸磨损。
2、设备操作控制系统采用进口PLC控制，技术先进，自动化程度高。
3、真空泵采用德国进口真空泵。马力较强，鼓掌率低。充分发挥真空特性。
Features
1、Key components in the hydraulic pressure system are imported, which are sate and reliable. The oil tanks are divided into two groups and become more sustained.
2、The equipment control system uses PLC from foreign. It has advanced technology and is highly automatic.
3、The vacuum pump is from Germany. The horsepower is strong and it can keep good condition all the time. The vacuum feature is well performed.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：3000mm*1500mm*2650mm
工作台尺（Working plate size）:2040mm*1080mm(内径inner size)
额定工作压力(Raying working pressure)：正压(Positive pressure)≤0.5Mpa负压(Negative pressure)≥-0.095Mpa
总功率(General power)：41.2kW
实际耗电(Actual power consumption)：约(about)13kW
整机重量(General power)：10T
|
2024-04-28 |
|
正负压机-沈阳华标动力
功能介绍
专业的实木单板贴覆设备,具有正负双压同时作用,配专用硅胶板，能同时完成门芯板双面木皮的贴覆。
General Introduction
This machine is just for filming the real wood. It can work with both positive pressure and negative pressure. With the special silicon sheet, it can paste the cabinet door with both sides at one time.
设备特性
1、液压系统关键部件采用进口配件，安全可靠技术优良。油缸分举升、加压二组，此结构减少油缸磨损。
2、设备操作控制系统采用进口PLC控制，技术先进，自动化程度高。
3、真空泵采用德国进口真空泵。马力较强，鼓掌率低。充分发挥真空特性。
Features
1、Key components in the hydraulic pressure system are imported, which are sate and reliable. The oil tanks are divided into two groups and become more sustained.
2、The equipment control system uses PLC from foreign. It has advanced technology and is highly automatic.
3、The vacuum pump is from Germany. The horsepower is strong and it can keep good condition all the time. The vacuum feature is well performed.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：3000mm*1500mm*2650mm
工作台尺（Working plate size）:2040mm*1080mm(内径inner size)
额定工作压力(Raying working pressure)：正压(Positive pressure)≤0.5Mpa负压(Negative pressure)≥-0.095Mpa
总功率(General power)：41.2kW
实际耗电(Actual power consumption)：约(about)13kW
整机重量(General power)：10T
|
2024-04-28 |
|
曲面包覆机--沈阳华标动力
功能介绍
本机采用刮涂方式使用油性包覆胶将PVC膜、浸漆纸等贴覆于踢脚线、门窗套线、楼梯扶手、塑钢门窗等。
各种线条的表面，依次完成表面、侧面、底边的贴覆。适合复杂线形的包覆。
General Introduction
Through scale gluing, this machine works with oil-solution glue to paste PVC and melamine paper on various kick boards, set lines of doors and windows, and the railing of the stairs. The wrapping of surface, sides and bottom are accomplished effectively in a single process. This machine is also fit for wrapping complicated lines and surfaces.
设备特性
1、涂胶方式采用刮胶的方式，可将油性胶均匀的刮图在PVC膜的表面。
2、底轮全部采用硅橡胶铝轮，耐磨性好，不粘胶，使用寿命长。
3、基材清扫器自动对进入机器的基材进行清扫、清洁。
Features
1、The glue is scaled on the surface of PVC.
2、The bottom wheels are all made by silicon and aluminum. They are wearable and not sticky to the glue.
3、The cleaner will automatically clean the base materials sent into the machine.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：4200mm*500mm*2100mm
涂胶方式（Way of gluing ）: 刮涂油性包覆胶(Scale the oil-solution glue)
涂胶宽度(Width of glue):300mm
最大加工高度(Maximum height of the work piece)：80mm
加工长度(Maximum length of the work piece):400mm～无限(Unlimit)
送料速度(Speed of working):0～25m/Min
总功率(General power)：8kW
整机重量(General power)：1.8T
|
2024-04-28 |
|
木门包覆机--沈阳华标动力
功能介绍
本机可进行套装工艺门边的加工制作，可对门边表面进行完美贴饰。
并可对普通工件进行包覆加工。
General Introduction
This machine can be used to process all kings of artificial door and wrap the perfect decoration.
It can also wrap the normal working pieces.
设备特性
1、本机机身加长，立杆加密，适合对复杂形状的门边进行贴饰。
2、本机涂胶宽度450mm,可完成对门边的包覆加工。
3、加强型PVC架，加宽型胶箱。
Features
1、The frame is longed and the standing bars are dense. It can paste complex door edge.
2、The gelatinizing width of the machine is 450mm. It can wrap the door sidelinge.
3、Reinforced PVC shelf and reinforced widen gelatinizing case.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5700mm*680mm*2100mm
涂胶方式（Way of gluing ）: 刮涂油性包覆胶(Scale the oil-solution glue)
涂胶宽度(Width of glue):450mm
最大加工高度(Maximum height of the work piece)：165mm
加工长度(Maximum length of the work piece):400mm～无限(Unlimit)
送料速度(Speed of working):0～20m/Min
总功率(General power)：10kW
整机重量(General power)：3T
|
2024-04-28 |
|
木门包覆机--沈阳华标动力
功能介绍
本机可进行套装工艺门边的加工制作，可对门边表面进行完美贴饰。
并可对普通工件进行包覆加工。
General Introduction
This machine can be used to process all kings of artificial door and wrap the perfect decoration.
It can also wrap the normal working pieces.
设备特性
1、本机机身加长，立杆加密，适合对复杂形状的门边进行贴饰。
2、本机涂胶宽度450mm,可完成对门边的包覆加工。
3、加强型PVC架，加宽型胶箱。
Features
1、The frame is longed and the standing bars are dense. It can paste complex door edge.
2、The gelatinizing width of the machine is 450mm. It can wrap the door sidelinge.
3、Reinforced PVC shelf and reinforced widen gelatinizing case.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5700mm*680mm*2100mm
涂胶方式（Way of gluing ）: 刮涂油性包覆胶(Scale the oil-solution glue)
涂胶宽度(Width of glue):450mm
最大加工高度(Maximum height of the work piece)：165mm
加工长度(Maximum length of the work piece):400mm～无限(Unlimit)
送料速度(Speed of working):0～20m/Min
总功率(General power)：10kW
整机重量(General power)：3T
|
2024-04-28 |
|
木门包覆机--沈阳华标动力
功能介绍
本机可进行套装工艺门边的加工制作，可对门边表面进行完美贴饰。
并可对普通工件进行包覆加工。
General Introduction
This machine can be used to process all kings of artificial door and wrap the perfect decoration.
It can also wrap the normal working pieces.
设备特性
1、本机机身加长，立杆加密，适合对复杂形状的门边进行贴饰。
2、本机涂胶宽度450mm,可完成对门边的包覆加工。
3、加强型PVC架，加宽型胶箱。
Features
1、The frame is longed and the standing bars are dense. It can paste complex door edge.
2、The gelatinizing width of the machine is 450mm. It can wrap the door sidelinge.
3、Reinforced PVC shelf and reinforced widen gelatinizing case.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5700mm*680mm*2100mm
涂胶方式（Way of gluing ）: 刮涂油性包覆胶(Scale the oil-solution glue)
涂胶宽度(Width of glue):450mm
最大加工高度(Maximum height of the work piece)：165mm
加工长度(Maximum length of the work piece):400mm～无限(Unlimit)
送料速度(Speed of working):0～20m/Min
总功率(General power)：10kW
整机重量(General power)：3T
|
2024-04-28 |
|
建材覆膜机--沈阳华标动力
功能介绍
可将各种PVC膜贴覆于家具、橱柜、音箱、工艺门、装饰墙等各种板式家具上，并可在加工装硅胶板后用于热装印膜和单木皮的贴覆工作。
General Introduction
This machine can be used to paste PVC on furniture, cabinets, speakers, relief doors, decoration panels for walls and other abnormal decoration shapes. With a special silicon sheet, it can also work with hot transfer and veneer.
设备特性
1、电器控制部分采用数显全自动控制，电器控制部件选用国内知名品牌，故障率低。微电脑温度控制仪，自动搜索温度变化速度，从而调整加热速度，以达到精确控制温度的目的。
2、采用远红外辐射系统加热，加热均匀，优质保温材料，节省能源。
3、使用一体化行走电机，电机、减速机一体，噪音小，故障率低。
4、本机标准配用国内顶级2X系列真空泵，稳定性好，易于维护。（并可选装德国进口真空泵，马力强劲，故障率低。）
5、大容量真空罐，双气道走气，吸覆爆发力大。
Features
1、The electronic part is fully automatic and digitalized control. The components are produced by famous domestic enterprises in good quality. The temperature is controlled by computer chips so that the heating speed is adjustable and the temperature can be perfectly managed.
2、Infrared heating system and high quality hear preservation material are used, which can ensure even heating and energy saving.
3、This machine uses integrated movement electromotor. It produces less noise and seldom breaks down.
4、 This machine uses top 2X series vacuum pump. It is stable and reliable and the maintenance work is simple. (You can also opt for German vacuum pump, which is strong and tough).
5、Large volume vacuum tank. It charges with double channels so that it can work with strong power.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5800（8800）mm*1500mm*1400mm
工作台尺（Working plate size）:2550mm*1100（1300）mm
额定工作压力(Raying working pressure)：负压(Negative pressure)≥-0.095Mpa
总功率(General power)：15kW
实际耗电(Actual power consumption)：约(about)5kW
整机重量(Weight)：2.5T
|
2024-04-28 |
|
多功能异形压机2580A--沈阳华标动力
功能简介
可进行各种高档PVC、热转印及单面木皮的表面贴饰。
此机加工的各种PVC工件粘接牢固，不反弹翘边。沟槽线条清晰到位。
可对各种较厚木皮进行完美贴饰。
General Introduction
It is used to work various high-profile PVC, hot transfer and single veneer.
The products are of high-quality, and will not peel off. The line and groove is clear.
It can also work with various thick veneers.
设备特性
1、整机采用意大利技术，工作性能稳定可靠。
2、单面双工位工作台自动进出，双曾铝合金工作台。
3、进出行走电机使用变频器控制，行走平稳。
4、操作系统采用进口PLC控制，大屏幕人机界面，控制方便，技术先进、自动化程度高。
Features
1、The whole machine adopts Italian technology and the operation is stable and mature.
2、The double working plates are operated automatically. It has doble-layered aluminum alloy plate.
3、The electromotor for plate movement is controlled by frequency governor so that the movement will be very smooth.
4、Operation system uses PLC from foreign. The interface is broad. It is easy to learn and convenient to operate, for it is highly autormatic.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：6600mm*2230mm*2150mm
工作台尺（Working plate size）:2550mm*1270mm(内径inner size)
最大加工高度(Maximum height of the work piece)：50mm
额定工作压力(Raying working pressure)：正压(Positive pressure)≤0.5Mpa负压(Negative pressure)≥-0.095Mpa
总功率(General power)：49.5kW
实际耗电(Actual power consumption)：约(about)16kW
整机重量(Weight)：10T
|
2024-04-28 |
|
多功能异形压机E--沈阳华标动力
功能介绍
可进行各种各种高档PVC进行高难度加工,可制作优质高亮光PVC工作。
可将各种实木薄片贴覆在较深的门芯R弧中。
General Introduction
The machine can be used to process all kinds of high quality PVC and high polished PVC piece.
It can also wrap all kinds of wooden slice to the deep door core arc.
设备特性
1、本机机架采用六张30mm厚整块钢板加工而成,强度大,无焊接变形。
2、10.4英寸进口彩色触摸屏,台湾“台达”PLC可编程控制器。
3、铝合金工作台,硅橡胶密封条。抗变形、耐老化、导热迅速。
4、四种操作模式,可满足各种工艺的要求。
Features
1、The machine frame is made up of 6 whole pieces of armor plates excavated and processed which are 30mm.
2、10.4 inches imported colorful touching dominating screen. Taiwan “Taida” PIC program controller.
3、Aluminum alloy working station, silicon rubber airproof strip. Resist the distortion, hard to age, and quick to transmit heat.
4、There are four kinds operation type which could meet all kinds of technical demands.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：9930mm*2330mm*2230mm
工作台尺（Working plate size）:2550mm*1270mm(内径inner size)
最大加工高度(Maximum height of the work piece)：50mm
额定工作压力(Raying working pressure)：正压(Positive pressure)≤0.8Mpa负压(Negative pressure)≥-0.095Mpa
总功率(General power)：50.2kW
实际耗电(Actual power consumption)：约(about)16kW
整机重量(General power)：16T
|
2024-04-28 |
|
多功能异形压机2580C--沈阳华标动力
功能介绍
可进行各种各种高档PVC、热转印及单面木皮的表面贴饰。
此机加工的各种PVC工件粘接牢固，不反弹翘边。沟槽线条清晰到位。
General Introduction
It is used to work various high-profile PVC, hot transfer and single veneer.
The products are of high-quality, and will not peel off. The line and groove is clear.
设备特性
1、液压系统关键部件采用进口配件，安全可靠技术
2、使用德国原装进口真空泵，马力强劲，故障率低。
3、操作系统采用PLC控制，大屏幕人机界面，控制方便，技术先进、自动化程序高。
4、数显电源、电压显示，清晰直观。采用微电脑温度控制仪器，精确控制温度。Features
1、Key components in the hydraulic pressure system are imported, which is safe and reliable.
2、Vacuum pump is imported from Germany; its horsepower is strong and it seldom breaks down.
3、The operation system chooses the imported PLC control equipment. The large man-machine screen is used. The machine is easy to control, and the technology advanced. The automatic degree is very high, too.
4、Number display current and voltage display ate easy to see. The micro computer control equipment is adopted to control the temperature exactly.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：9930mm*2230mm*2150mm
工作台尺（Working plate size）:2300mm*1270mm(内径inner size)
最大加工高度(Maximum height of the work piece)：50mm
额定工作压力(Raying working pressure)：正压(Positive pressure)≤0.6Mpa负压(Negative pressure)≥-0.095Mpa
总功率(General power)：49.5kW
实际耗电(Actual power consumption)：约(about)16kW
整机重量(General power)：14T
|
2024-04-28 |
|
建材覆膜机--沈阳华标动力
功能介绍
本机可进行套装工艺门边的加工制作，可对门边表面进行完美贴饰。
并可对普通工件进行包覆加工。
General Introduction
This machine can be used to process all kings of artificial door and wrap the perfect decoration.
It can also wrap the normal working pieces.
设备特性
1、本机机身加长，立杆加密，适合对复杂形状的门边进行贴饰。
2、本机涂胶宽度450mm,可完成对门边的包覆加工。
3、加强型PVC架，加宽型胶箱。
Features
1、The frame is longed and the standing bars are dense. It can paste complex door edge.
2、The gelatinizing width of the machine is 450mm. It can wrap the door sidelinge.
3、Reinforced PVC shelf and reinforced widen gelatinizing case.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5700mm*680mm*2100mm
涂胶方式（Way of gluing ）: 刮涂油性包覆胶(Scale the oil-solution glue)
涂胶宽度(Width of glue):450mm
最大加工高度(Maximum height of the work piece)：165mm
加工长度(Maximum length of the work piece):400mm～无限(Unlimit)
送料速度(Speed of working):0～20m/Min
总功率(General power)：10kW
整机重量(General power)：3T
|
2024-04-28 |
|
建材覆膜机--沈阳华标动力
功能介绍
本机可进行套装工艺门边的加工制作，可对门边表面进行完美贴饰。
并可对普通工件进行包覆加工。
General Introduction
This machine can be used to process all kings of artificial door and wrap the perfect decoration.
It can also wrap the normal working pieces.
设备特性
1、本机机身加长，立杆加密，适合对复杂形状的门边进行贴饰。
2、本机涂胶宽度450mm,可完成对门边的包覆加工。
3、加强型PVC架，加宽型胶箱。
Features
1、The frame is longed and the standing bars are dense. It can paste complex door edge.
2、The gelatinizing width of the machine is 450mm. It can wrap the door sidelinge.
3、Reinforced PVC shelf and reinforced widen gelatinizing case.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5700mm*680mm*2100mm
涂胶方式（Way of gluing ）: 刮涂油性包覆胶(Scale the oil-solution glue)
涂胶宽度(Width of glue):450mm
最大加工高度(Maximum height of the work piece)：165mm
加工长度(Maximum length of the work piece):400mm～无限(Unlimit)
送料速度(Speed of working):0～20m/Min
总功率(General power)：10kW
整机重量(General power)：3T
|
2024-04-28 |
|
建材覆膜机--沈阳华标动力
功能介绍
本机可进行套装工艺门边的加工制作，可对门边表面进行完美贴饰。
并可对普通工件进行包覆加工。
General Introduction
This machine can be used to process all kings of artificial door and wrap the perfect decoration.
It can also wrap the normal working pieces.
设备特性
1、本机机身加长，立杆加密，适合对复杂形状的门边进行贴饰。
2、本机涂胶宽度450mm,可完成对门边的包覆加工。
3、加强型PVC架，加宽型胶箱。
Features
1、The frame is longed and the standing bars are dense. It can paste complex door edge.
2、The gelatinizing width of the machine is 450mm. It can wrap the door sidelinge.
3、Reinforced PVC shelf and reinforced widen gelatinizing case.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5700mm*680mm*2100mm
涂胶方式（Way of gluing ）: 刮涂油性包覆胶(Scale the oil-solution glue)
涂胶宽度(Width of glue):450mm
最大加工高度(Maximum height of the work piece)：165mm
加工长度(Maximum length of the work piece):400mm～无限(Unlimit)
送料速度(Speed of working):0～20m/Min
总功率(General power)：10kW
整机重量(General power)：3T
|
2024-04-28 |
|
木塑板覆膜机--沈阳华标动力
功能介绍
可将各种PVC膜贴覆于家具、橱柜、音箱、工艺门、装饰墙等各种板式家具上，并可在加工装硅胶板后用于热装印膜和单木皮的贴覆工作。
General Introduction
This machine can be used to paste PVC on furniture, cabinets, speakers, relief doors, decoration panels for walls and other abnormal decoration shapes. With a special silicon sheet, it can also work with hot transfer and veneer.
设备特性
1、电器控制部分采用数显全自动控制，电器控制部件选用国内知名品牌，故障率低。微电脑温度控制仪，自动搜索温度变化速度，从而调整加热速度，以达到精确控制温度的目的。
2、采用远红外辐射系统加热，加热均匀，优质保温材料，节省能源。
3、使用一体化行走电机，电机、减速机一体，噪音小，故障率低。
4、本机标准配用国内顶级2X系列真空泵，稳定性好，易于维护。（并可选装德国进口真空泵，马力强劲，故障率低。）
5、大容量真空罐，双气道走气，吸覆爆发力大。
Features
1、The electronic part is fully automatic and digitalized control. The components are produced by famous domestic enterprises in good quality. The temperature is controlled by computer chips so that the heating speed is adjustable and the temperature can be perfectly managed.
2、Infrared heating system and high quality hear preservation material are used, which can ensure even heating and energy saving.
3、This machine uses integrated movement electromotor. It produces less noise and seldom breaks down.
4、 This machine uses top 2X series vacuum pump. It is stable and reliable and the maintenance work is simple. (You can also opt for German vacuum pump, which is strong and tough).
5、Large volume vacuum tank. It charges with double channels so that it can work with strong power.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5800（8800）mm*1500mm*1400mm
工作台尺（Working plate size）:2550mm*1100（1300）mm
额定工作压力(Raying working pressure)：负压(Negative pressure)≥-0.095Mpa
总功率(General power)：15kW
实际耗电(Actual power consumption)：约(about)5kW
整机重量(Weight)：2.5T
|
2024-04-28 |
|
高光PVC覆膜机--沈阳华标动力
功能介绍
可将PVC膜贴覆于家具、橱柜、音箱、工艺门、装饰墙裙板等各种板式家具上，并可在加装硅胶板后用于热转印膜和单面木皮的贴覆工作。
General Introduction
This machine can be used to paste PVC on furniture, cabinets, speakers, relief doors, decoration panels for walls and other abnormal decoration shapes. With a special silicon sheet, it can also work with hot transfer and veneer.
设备特性
1、本机行走为手动操作，工作台不动，手动推拉加温仓。
2、真空控制使用电接点真空表，自动控制真空气压。微电脑温度控制仪，自动搜索温度变化速度，从而调整加热速度，以达到精确控制温度的目的。
3、本机标准配用国内顶级2X系列真空泵，稳定性好，易于维护。（并可选装德国进口真空泵，马力强劲，故障率低。）
Features
1、This machine travel is operated manually. The working plate is fixed the heating cabinet is movable.
2、The vacuum is measured with vacuometer automatically. The temperature is controlled by computer chips so that heating speed is adjustable and the temperature can be perfectly managed.
3、This machine uses top 2X series vacuum pump. It is stable and reliable and the maintenance work is simple.(You can also opt for German-made vacuum purm, which is strong and tough).
技术参数(Technical Specifications)
外形尺寸（Exterior size）：5500mm*1500mm*1400mm
工作台尺（Working plate size）:2550mm*1100（1300）mm
额定工作压力(Raying working pressure)：负压(Negative pressure)≥-0.095Mpa
总功率(General power)：15kW
实际耗电(Actual power consumption)：约(about)5kW
整机重量(Weight)：2T
|
2024-04-28 |
友情链接