点击图片查看大图
功能介绍
可进行各种各种高档PVC、热转印及单面木皮的表面贴饰。
此机加工的各种PVC工件粘接牢固，不反弹翘边。沟槽线条清晰到位。
General Introduction
It is used to work various high-profile PVC, hot transfer and single veneer.
The products are of high-quality, and will not peel off. The line and groove is clear.
设备特性
1、液压系统关键部件采用进口配件，安全可靠技术
2、使用德国原装进口真空泵，马力强劲，故障率低。
3、操作系统采用PLC控制，大屏幕人机界面，控制方便，技术先进、自动化程序高。
4、数显电源、电压显示，清晰直观。采用微电脑温度控制仪器，精确控制温度。Features
1、Key components in the hydraulic pressure system are imported, which is safe and reliable.
2、Vacuum pump is imported from Germany; its horsepower is strong and it seldom breaks down.
3、The operation system chooses the imported PLC control equipment. The large man-machine screen is used. The machine is easy to control, and the technology advanced. The automatic degree is very high, too.
4、Number display current and voltage display ate easy to see. The micro computer control equipment is adopted to control the temperature exactly.
技术参数(Technical Specifications)
外形尺寸（Exterior size）：9930mm*2230mm*2150mm
工作台尺（Working plate size）:2300mm*1270mm(内径inner size)
最大加工高度(Maximum height of the work piece)：50mm
额定工作压力(Raying working pressure)：正压(Positive pressure)≤0.6Mpa负压(Negative pressure)≥-0.095Mpa
总功率(General power)：49.5kW
实际耗电(Actual power consumption)：约(about)16kW
整机重量(General power)：14T
多功能异形压机2580C--沈阳华标动力