点击图片查看原图
- 产品品牌：红帆激光
- 产品型号：1490
机器配置：
◆采用高精度32位浮点DSP+FPGA双核控制，浮点DSP主频高达300MHZ，系统运行效率整体提高。
High-precision 32-bit floating point DSP
+ FPGA dual-core control, floating-point DSP clocked at up to 300MHZ, improve the overall efficiency of the system.
◆进口双导轨和传动系统，配置减速结构，三相电机，三相驱动器，切割更光滑，设备运行更稳定。Imported dual rails and transmission, configure deceleration structure, three-phase motors, three-phase drives, more smooth cutting, equipment and more stable operation.
◆可以在键盘上设置走边框的操作，分为开光切边框、关光走边框、及四角打点走边框三种模式。You can walk on the keyboard to set the
border operation into the opening cut border,
light go off
borders, corners and borders three modes RBI
walk
◆配备高速DSP控制系统，USB2.0接口直接输出方式，智能化软件，可直接支持Autocad,Coreldraw等软件输出，支持U盘功能，U盘可与主板互拷贝文件，完成全脱机运行，实现文件共享提高工作效率。
Equipped with high-speed DSP control system, USB2.0
interface directly to the output mode,
intelligent software that can directly
support Autocad, Coreldraw software
such as output, support U disk
function, U disk to copy files with
each board, complete
the entire run offline, file shared
improve work efficiency.
◆可分层设计：机身采用分层的设计，机器能顺利通过窄小的门和通道，安装便捷。
Scalable Design: fuselage using hierarchical
design, the machine can go through
narrow doors and
passageways easy to install.
◆完善的断电续刻功能，断电第二次上电时图形都能实现良好对接，不重复切割节省时间，也保障贵重材料不被切坏。
Sound power continued carved features,
power and the second power-graphs
can achieve a good butt, do not
repeat cutting to save time, but also protect the precious
material is not bad cut.
◆大功率二氧化碳激光管，配合进口反光镜、聚焦镜片，延长使用寿命。
◆运行速度，激光能量实时可调，极大地方便客户的操作，同时具备切割、雕刻(含坡度雕刻)和扫描功能，达到一机多用。应用行业广
Speed, real-time
tunable laser energy, which greatly facilitate the customer's operations,
along with cutting, engraving (including
slope carving) and
scanning capabilities, to achieve a multi-purpose machine. Wide application industry
◆完整的水保护系统和抽烟装置，有效保障激光管的使用寿命和机器的清洁。
Complete water
protection systems and smoke devices, effectively guaranteeing the life of
laser tube and the machine clean.
◆选配双头激光切割机，使工作效率成倍增长。
Optional Double
laser cutting machine, the
working efficiency exponentially.
◆可选配蜂窝平台、红光定位系统、大功率激光管。
Optional Honeycomb
platform, red light positioning system, high-power laser tube
◆红帆激光雕刻机通过了CE和FDA的全面认证，性能更加可靠。
Redsail Laser
engraving machine passed CE and FDA fully certified, more reliable
performance.
◆ 可以对布料、皮革、木材、亚克力等众多非金属材料进行切割，运用行业广泛。
Can be fabric,
leather, wood, acrylic and many
other non-metallic materials for
cutting, the use of industry-wide.
适用范围：
服装布花切割、刺绣切割、布制玩具布料切割、家饰布艺窗帘切割、布制品手袋切割、汽车内饰行业激光切割、汽车皮椅切割、汽车地毯切割、雕花、打孔、玩具行业中皮料、皮革切割及表面雕花。工艺品、模型、广告水晶字切割、装饰、电器、塑胶、行业的亚克力板，可雕刻或切割木制品、纸张、皮革、毛料、布皮、亚克力、橡胶版、瓷砖、大理石、水晶、玉石、竹制品等非金属材料。
机器参数：
机器型号 | CM1290 | CM1490 | CM1690 | CM1613 | |
工作面积 | 1200*900 | 1400*900 | 1600*900 | 1600*1300 | |
激光功率（W） | 80/100 | 80/100 | 80/100 | 80/100 | |
激光类型 | l 二氧化碳玻璃管 | ||||
控制系统 | DSP | ||||
驱动方式 | 步进电机微步驱动 | ||||
工作速度 | 0-1000(mm/s) | ||||
图形模式 | Plt, Dxf, Bmp, Ai, Dst | ||||
平台类型 | 蜂窝状、刀条状（可选） | ||||
重复精度 | ≤0.02mm | ||||
工作电压 | AC 220±10%/50-60Hz | ||||
整机功率 | ≤1000w | ||||
产品卖点：运行速度，激光能量实时可调，极大地方便客户的操作，同时具备切割、雕刻(含坡度雕刻)和扫描功能，达到一机多用。应用行业广，完整的水保护系统和抽烟装置，有效保障激光管的使用寿命和机器的清洁。选配双头激光切割机，使工作效率成倍增长。
